New Remote Control for NIKON D90 D60 D40 D3000 D5000
Wirelessly Trigger the Shutter -After switching your Nikon cameras in remote mode, you can instantly trigger the shutter with this wireless remote form a distance of up to 8 meters(25ft). -It allows you to include yourself in the photo and take picture whenever you are ready.
Avoid Camera Vibration=Sharper Pictures! -Since you can trigger the shutter without touching the camera body, it can avoid camera vibration, thus resulting in sharper pictures.
Replaceable Battery -A 3V CR2025 battery is included and it is replaceable.
Compact and Light weighted -It is so compact that you can put it in your pocket. -Dimension: 60 x 27 x 5mm
Nikon D7000, D3000, D5000, D90, D80, D70S, D70, D50, D60, D40, D40X,8400, 8800, Pronea S, F75, F65, F55, N65, N75, Nuvis S, Lite Touch(These cameras have built-in Infrared (IR) port so that they will work with the remote)
For the first time use. please pull out the plastic separator at the battery holder.
Mount the camera on a tripod or place the camera on a stable, level surface.
Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).
How the camera focuses and shoots depends on the option selected camera's custom setting. For futher information,check your camera's manual.
Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.