• Commonly used in 12V car tires.

• Suitable for motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys and so on.

• If the tire suddenly leaks air, it is used for first aid.

• Maintain correct tire pressure to ensure driving safety and save gasoline.

• It is used to inflate tires, rubber boats, air cushions, inflatable toys, balls and many other purposes.

Specification:

• Product: Car air pump

• Pointer models: without tire pressure inflation

• Digital display model: with preset tire pressure inflation

• Size: about 14*20*7cm

• Material: ABS

• Power cord length: about 300cm, tube length is about 50cm

• Output power: 120 (W)

• Rated voltage: DC 12 (V)

• Light: LED

Use:

• 1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated. Continue to tighten the air nozzle. At this time, the air will no longer leak out.

• 2. Insert it into the DC 12V cigarette lighter.

• 3. When inflating, the indicator pointer rises with the saturation of the tire. When the pointer reaches the appropriate tire pressure (generally 223kpa=35PSI), take out the plug and air nozzle.

• 4. Please connect the equipped professional ball needle and plastic nozzle with the air nozzle to inflate the ball and other air-demanding equipment.

Note:

• 1. It cannot be used to inflate the tires of large and overweight vehicles, such as trucks, large trucks, container trucks, etc.;

• 2. Please start the car engine to increase the power when using it, without consuming the car battery power;

• 3. The machine is limited to DC (DC12V) power supply, and household high-voltage AC (AC220V) power supply is not allowed;

• 4. When inflating, please stop for 10 minutes to cool down after 10 minutes of continuous work to prevent damage to the air pump and accessories and extend the life of the motor. When inflating the inflatable boat, it can work continuously for 30 minutes;

• 5. Generally, when the tire is inflated, it will reach 30PSI in about 3-5 minutes, while the larger tire will take a little longer; if the pointer quickly rises to 50-100PSI when it starts to inflate, it means that the air is blocked and the air does not enter the tire. When you need to unplug the connector immediately.

• 6. Don't leave the body when using it, pay attention to the tire pressure at any time, and don't be too saturated;

• 7. After the machine is used, the gas nozzle wrench must be straightened to avoid the fatigue of the rubber elasticity inside;

• 8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);

• 9. Avoid dampness, heavy falls and sand and mud intrusion, and don't let children play with it to avoid damage.