This product is a human body infrared motion detection sensor light
Short press the mode button to switch (the sensor mode light will be on for 2 seconds, and it will automatically go off-constant light mode-off, three modes cycle)
Short press the color temperature key to switch the light color temperature (white light-natural light-warm white light, three color temperature cycles)
Long press the color temperature key to adjust the brightness of the light. In smart sensing mode, when the ambient light is weak, if the probe detects human movement, the LED will be on. After the human body goes out of the sensing range of the probe, the LED will turn off after a delay of 10 seconds
Ultra thin design, both aesthetics and application
Installation:
When using magnetic installation, you need to tear off the protective paper of the double-sided adhesive on the surface of the adhesive iron sheet first
Then fix the adhesive-backed iron sheet on the target surface, and finally adsorb the light bar on the adhesive-backed iron sheet
Specifications:
Charging voltage: DC5V
Charging current: 0.5A
Battery capacity: 3.7V 1000mAh
Output color temperature: cold light 6500K-7000K, positive white light 4500K-5000K, warm light 2800K-3200K
PIR sensing distance: 3-5 meters
Product size: 300 * 38 * 10mm