ANENG clamp-on multimeter gives an accurate reading on AC and DC current measurement, AC/DC voltage, resistance and more tests. It features a loud audible beep for NCV and lives line detection, 1.1-inch jaw opening, auto-ranging, true-RMS, 15-minute auto-off, data hold, flashlight, and more.
Specifications:
Accuracy/Range | 6000counts | Resolution |
DC voltage / AC voltage | ||
DC/AC6V | ±(0.5%+3) | 0.001V |
DC/AC60V | 0.01V | |
DC/700V | 0.1V | |
AC500V | ±(0.8%+10) | 1V |
Resistance | ||
600Ω | ±(0.8%+5) | 0.1Ω |
6kΩ | ±(0.8%+3) | 1Ω |
60kΩ | 10Ω | |
600kΩ | 100Ω | |
6MΩ | 1kΩ | |
60MΩ | ±(2.5%+3) | 10kΩ |
“----” | Diode forward voltage drop | Forward DC current is about 1mA, open circuit voltage is about 3V |
The buzzer sounds long and the resistance of the test is less than (50±20) Ω. | Open circuit voltage is about 0.4V, press "power" for two-speed function switching | |
Capacitance | ||
10nF | ±(3.5%+20) | 10pF |
100nF | 100pF | |
1uF | 1nF | |
10uF | 10nF | |
100uF | 100nF | |
1mF | 1uF | |
10mF | 10uF | |
60mF | ±(5%+3) | 100uF |
AC/DC Current | ||
60A | ±(2.5%+30) | 0.01A |
600A | 0.1A | |
Temperature | ||
(-20-1000 )℃ | ±(1.0%+5)<400℃; ±(1.5%+15)≥400℃ |
1℃ |
(0-1832 )℉ | ±(0.75%+5)<750℉; ±(1.5%+15)≥750℉ |
1℉ |
Frequency | ||
10Hz | ±(0.1%+3) | 0.01Hz |
100Hz | 0.1Hz | |
1kHz | 1Hz | |
10kHZ | 10Hz | |
100kHZ | 100Hz | |
1MHz | 1kHz | |
10MHz | 10kHz |
Note: