• The handlebar is made of TPV (Thermoplastic Vulcanize), which is integrally molded, and has good anti-aging, heat resistance, high toughness, high resilience, etc., which is durable and environmentally friendly and can be used in a wider range
• The product is equipped with a five gear regulating switch, and the temperature can be adjusted at will. In winter, keep your hands warm and say goodbye to chilblain
• Built in smart chip, when the voltage is too high or too low, it will automatically cut off the power supply and enter the standby state, making it safer to use
• High strength waterproof design, not afraid of wind and rain, can also be used normally in rainy and snowy weather

Specifications:

• Product model: CS-1324A1
• Net weight of product: 280G
• Product material: PVC
• Working voltage: 12.4V-15V
• Output power: 20-40W
• Operating temperature: - 15 ℃-50 ℃
• Handle size: left handlebar: 12.7cm; Right handlebar: 11.9cm
• Applicable handlebar diameter: 2.2cm in diameter
• Scope of application: ATV
• Protection voltage: when the voltage is lower than 12.5 ± 0.2 V, the heating handle will turn off the output and the controller will enter the sleep state
• Temperature range:
• First gear:
• Left handlebar 10min 28.6 ℃ 60min 31.9 ℃ 120min 33.1 ℃ 180min 36.3 ℃
• Right handlebar 10min 26.6 ℃ 60min 29.6 ℃ 120min 32.5 ℃ 180min 36.4 ℃
• Second gear:
• Left handlebar 10min 35.5 ℃ 60min 48.4 ℃ 120min 50.3 ℃ 180min 50.4 ℃
• Right handlebar 10min 38.8 ℃ 60min 45.8 ℃ 120min 52.2 ℃ 180min 54.0 ℃
• Third gear:
• Left handlebar 10min 47.8 ℃ 60min 64.2 ℃ 120min 64.9 ℃ 180min 65.6 ℃
• Right handlebar 10min 47.0 ℃ 60min 65.1 ℃ 120min 65.8 ℃ 180min 66.4 ℃
• Fourth gear:
• Left handlebar 10min 54.2 ℃ 60min 62.3 ℃ 120min 74.3 ℃ 180min 74.6 ℃
• Right handlebar 10min 53.5 ℃ 60min 61.1 ℃ 120min 75.8 ℃ 180min 78.7 ℃
• Fifth gear:
• Left handlebar 10min 59.4 ℃ 60min 67.8 ℃ 120min 84.4 ℃ 180min 85.3 ℃
• Right handlebar 10min 61.9 ℃ 60min 70.2 ℃ 120min 86.8 ℃ 180min 89.1 ℃

Instructions:

• 1. Power on the controller, the indicator flashes 3 times, and enters the standby state [Note: the green color of the indicator flashes indicates normal, and the blue color indicates that the protection function does not work (controller failure), but it can also be heated normally].
• 2. In the standby mode, press the button on the handle sleeve. If the power supply voltage is lower than the electric heating starting voltage at this time, the red indicator flashes several times to enter the standby mode.
• 3. In the standby state, press the button on the handle sleeve. If the power supply voltage is higher than the electric heating starting voltage at this time, the system will enter into rapid heating, so that the handle sleeve can rise rapidly. After a period of time, it will enter into stable heating.
• 4. Under working condition, each time you press the button, the electric heating power will increase by 20%. There are five levels in total. The color of the indicator light is: blue blue green purple red.
• 5. In the working state, when the power supply voltage is lower than the electric heating startup voltage, the corresponding gear indicator flashes. If the voltage is lower than this voltage for 7 seconds, the controller will cut off the electric heating output and enter the standby state. If the normal voltage is recovered within 7 seconds, the indicator light is always on and enters into normal operation.
• 6. In the working state, if the power supply voltage is higher than the set maximum voltage, the controller will immediately cut off the heating output and enter the standby state.