Adopts premium TPU, PET and PC materials with 360 degrees all-inclusive design, which protects your phone from scratches, shocks, and other daily damage as well. Exceeding the IP68 waterproof rating, this case is with a precise 100% waterproof effect and is suitable for daily use, surfing, swimming, cycling, driving, snorkeling and etc.

• Dustproof: With IP6X rating with zero dust intrusion, which can isolate dirt, dust, sandstorms, and can withstand dirt and construction dust

• Waterproof: Pass the IP68 waterproof rating test, which can completely isolate the mobile phone from snow, ice and water. It can be used normally for 30 minutes under two meters of water

• Anti-drop: 2 meters drop resistance, the high-quality impact-resistant PC, soft-touch TPU bumper and air-tight and water-tight acoustic membrane provides a 360° all-round protection

• The PET screen protection film is wear-resistant, scratch-resistant, and drop-resistant. With sensitive touch, it will not affect any function of the touch screen at all

• Reserve the camera viewfinder window to adapt to shooting in a variety of environments

• Reserve the protective plug for the earphone jack, the charging port, the power button, and the volume button, which can be disassembled freely, safe and practical

• With a built-in magnet, compatible with MagSafe and support wireless charging

• Reserve the protective plug for the earphone hole, the charging port, the power button, and the volume button. Freely detachable, safe and practical

• Thin and light style ensure clear call quality

Installation method:

• 1. Put the paper on the empty shell and conduct a waterproof test for 15 minutes to 30 minutes (reminder: carefully check the sealing ring before the test, whether the waterproof gasket is properly assembled, whether it is installed tightly, and conduct a comprehensive inspection)

• 2. If the test shows no leakage, please install the real machine correctly according to the above procedures

• 3. The mobile phone must be assembled with the bare machine (no film, decorations, tempered glass, etc.), it should be attached to the body of the mobile phone. When installing the machine, you must first align the mute button before installing the machine. The product screen is scratch-resistant, and the phone does not need to apply screen film. The extra film will affect the protection effect.

• 4. After installation, test the function keys to see if the phone can be used normally

• 5. If the test shows there is leaking water, please do not install the real machine, please contact the sales staff as soon as possible

• 6. Make sure that the paper in the empty shell is not wet, and there is no water in the shell, you can install the real machine (Note: After confirming that there is no water leakage, it is not allowed to install the phone into the water for testing.)