• Use a normal USB flash drive as the medium for transfer design
• 34pin floppy driver interface,5V DC power supply, easy to install 
• 1000pcs partitions in a USB flash drive can be used
• Built-in self-format function. (read relevant documents to use this function)
• Jumpers with function for different machines (SFR1M44-U100K do not support jumpers)
• Panel: 8segment numbers: represent partitions number. Green led: status of read and write operation
• USB port: connect the USB flash drive
• Button: Left button is used to rise a ten-digit, and the right button is used to rise a single-digit, press 2 buttons together to rise hundred-digit

Operation :

• Format USB flash drive:
• Use the built-in self-format function to format USB flash drives into 1000pcs partitions
• Install an emulator on the computer, and format every partition by operating driver A
• Use emulator UFA1M44-100, plug a USB flash drive into it, and connect to the computer, it will be recognized as a removable driver A or B under WINDOWS XP/2000/7, and format every partition.
• UFA1M44-100 is also built-in a self-format function.
• Read and write data:
• Install an emulator on the machine
• Install an emulator on the computer
• Connect the USB flash drive on the computer, read and write data directory by software, under WINDOWS XP/2000
• Use emulator UFA1M44-100, plug a USB flash drive into it, connect to the computer, read and write data under WINDOWS XP/2000/7

Specifications:

• Housing Material: ABS  
• Capacity: 1.44MB 2HD 
• Format of disk: Cylinders: 80
• Tracks: 160 Sectors/Track
• 18 Bytes/Sector: 512 Data
• Transfer rate: 500 kbps
• Encoding method: MFM