SE-LGI210A-PE is a PCI Express x1 single-port PoE+ Gigabit Ethernet frame capture card developed based on the Inetl I210 chip solution, and is compatible with PCIe x4, x8, and x16 channels. It also supports IEEE802.3af, IEEE802.3at protocol, each port supports 30W power supply, which can realize remote equipment power supply. SE-LGI210A-PE server adapter card design is mainly designed to be used in industrial field visual inspection servers and equipment, visual field clients, fast mobile Ethernet data transmission equipment, etc. It is also suitable for ordinary servers and workstations.

• Supports PCI-Express Host Interface Specification v2.0 with 2.5GT/s bus width
• Compliant with PCI bus power management interface specification Rev1.2
• PCI-Express lanes: x1
• Support dual-port RJ45, transmission speed up to 1Gbps
• Compliant with IEEE802.3ab, IEEE802.3u and IEEE802.3 specifications
• Comply with IEEE80.23af, IEEE80.23at network standard
• Each port supports 30W power supply
• Each port supports power supply voltage: 44-57VDC
• Half and full duplex operation at 10/100Mbps at all supported speeds
• Layer 2 Features: IEEE 802.3x Flow Control - IEEE 802.1q VLAN
• Supports Receive Side Scaling (RSS)
• Support IPv4, IPv6 protocols
• Supports jumbo frames up to 9.5K
• Supports UDP, TCP and IP checksum offloading
• Management and RMON Statistics
• Support for virtual machine device queues
• Next-generation VMDq support (8VM)
• Interrupt throttling control to limit interrupt rate and CPU usage
• Chipset: Intel I210AT

Specification:

• Product Dimensions: L114 x W69 mm (without PCIe bracket)
• Network type: Gigabit Ethernet POE+ image acquisition
• Bus Type: PCI Express x1 v2.0, compatible with x4, x8, x16
• Main Chipset: Intel I210AT
• Transmission medium: 1 x RJ45 (copper cable, POE power supply requires Cat5)
• Transmission rate: 1000/100Mbps
• Max power: 30W/ports
• Power supply voltage: 44-57VDC
• Network topology:
• 1000BASE-T Gigabit Ethernet / 100BASE-T Fast Ethernet
• IEEE 802.3ab, IEEE 802.3u, IEEE 802.3af power over ethernet
• IEEE 802.3af power over ethernet enhancements
• IEEE 802.3Q VLANs, IEEE 802.3 Full Duplex and flow control
• IEEE 802.3az - Energy Efficient Etherner (EEE)
• Features:
• Adaptive power consumption output required by external devices: Class 0, Class 1, Class 2, Class 3, PXE, SR-IOV, IPsec offload, IPv4/IPv6, jumbo frames and RSS support
• System Requirements:
• Win 7/ Server2012/ Server2008/ Win 8/ Win 8.1/ Server2016/ Win 10, 32/64bit
• FreeBSD, for Linux, VMWare ESXi
• Available PCI Express x1/x4/x8/x16 slots