• It provides a fast, economical way to produce angled bends in round tubing

• Comes with 7 molds in different sizes, you can quickly change them according to different needs

• Constructed of sturdy steel material, which is high-strength, high hardness, and not easy to break

• It can bend up to 2mm wall thickness tubing, easy operation

• Suitable for wire pipe, circle-steel pipe, low-pressure liquid jointing pipe, etc.

Specification:

• Model: SWG-25

• Working range: 0-180 °

• Outer diameter of mold: 10/12/14/16/19/22/25mm

• Pipe wall thickness: 0.8-2.0mm

Instructions:

• 1. Fix the base.

• 2. Select the mold and roller according to the required pipe size.

• 3.When using, the mold is sleeved onto the base shaft, then the bracket is sleeved onto the shaft, then the roller is put into the positioning block, and fixed with bolts.

• 4. Put the support plate to the rocker, insert the pipe into the middle of the mold and roller, and adjust the nut to fit with the mold, pipe and roller.

• 5. Pull the handle to start the bending work.