• Great tool for laying floor/wall tiles. It is suitable for tiles with a thickness of 3mm-18mm, and suitable for tiles with a gap of ≥2mm

• The new leveling system keeps the tiles at the same level, preventing them from shifting as they dry

• The tile leveling system is reusable, durable and wear-resistant. It is very easy to install or remove using a special wrench

• Easy to use, increases the speed of tile installation and reduces the need for grinding and polishing, making flat tiles look perfect

Specifications:

• Cross: 1.0mm

• Applicable: seamless tiles, to polish tiles

• Applicable brick difference: >1.5mm

Usage Tips:

• Lay the first tile, leaving more than 2mm. Close to tile.

• Insert T-pins next to the gap between the tiles. Then rotate 90 degrees and the T-needle is attached to the bottom of the two tiles. Adjust the cover by hand / wrench until the two tiles are on the same level.

• After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle.

No Need To Remove the T-leveling Tile System:

• 1. Ceramic tile joints are 2mm or more (cross joints are recommended)

• 2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned.

• 3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried.