800 FT in open area range, with 58 ringtones and 4 levels volume to meet your needs for different occasions
Comes with the receiver, will not interfere with other equipment in your home or those of your neighbors, ensures that you will never miss any visitors, even if you are several rooms away
Preserves your last set melody after a power outage, no need to reset to your previous settings; convenient and easy to use design for a better user experience
Simply get the bell plugged into the socket and Tear off the tape of the sensor and stick it on the door frame
Featuring multiple chime options, handy volume control and long working distance, the wireless doorbell kit is a must-have accessory for home, office, store, etc
Specifications:
Material: ABS
Model number: W-101
Working orange: 800Ft (250m) in open space (depends on different use environments)
Melody: 58 chimes
Volume: 4 levels
Transmitter operating voltage: no battery needed
Receiver operating voltage: AC220V 50HZ
Transmitter standby power consumption: 0uA
Receiver standby power consumption: <3W
Transmitter transmit power: <10mW
Transmitter transmit frequency: 433.92 Mhz
Receiver transmit frequency: 433.92 Mhz
Transmitter press key: 1
Receiver press key: volume key, music selection key and mode key
Transmitter Size: 31 x 72 x 21.14mm
Receiver Size: 60.1 x 60 x 68.7mm (EU plug)
Transmitter weight: 26.9g
Receiver weight: 68.3g
Transmitter storage temperature/humidity: -20~60℃/≤85%RH
Receiver storage temperature/humidity: -20~60℃/≤85%RH
Receiver horn: 16Ω/0.25W
Transmitter Waterproof Grade: IP44
Installation:
The transmitter can be pasted with the double-sided tape that comes with the random delivery, or the holes can be fixed with screws.
When disassembling and installing the transmitter, be careful not to touch the electronic components, and do not upside down.
The receiver can be used when plugged into a regular indoor socket.
Code operation:
1. Code matching
Long press the mode key for about 3s and the doorbell rings (bird calls) to enter the code matching mode (exit the code matching state after 5s).
At this time, press the transmitter host to ring (current music) twice and the code matching is successful. If the host does not ring, please repeat the above operation.
2. Code clearing
Long press the mode key for about 10s, and the host rings (Ding Dong) and the code clearing is successful.
Note:
If you need to replace music, please re-match (hold receiver's music button, it will trigger clean pairing function).