• The product is made of Kevlar wear-resistant cloth material, faster heat, more uniform heat after 8000 times wear test success, and more sturdy and durable
• The product switch built-in intelligent temperature control chip, with six adjustable temperature, intelligent temperature control is more convenient, according to personal preference, and adjust to the corresponding temperature
• The product increases the memory function, anytime you turn on the product can keep the best temperature of the last adjustment, more intimate and more convenient
• The product is specially designed with a neutral function, when the switch is adjusted to neutral, the white light will be on for 5 seconds and then automatically shut down with 5 flashes, which will not consume the power of the battery and is safer and more convenient to use
• The product adopts a large heating piece, large heating area, fast heating speed, 10 seconds of fast heat, lets your hands in the cold winter is no longer cold
• The product heating piece adopts magic sticker fixation, is convenient and quick, easy and quick to install, has no damage to the handlebar, is beautiful and generous
• The product adopts IP67 waterproof grade, and even if the handlebar cover soaks in water can also work normally. The handlebar cover needs to be cleaned, just unplugged and can be washed, very convenient

Specifications:

• Product Model: CSZH-974B2
• Product weight: 133g
• Input voltage: DC12V
• Product line length: 106CM (heating pad to switch); 142CM (switch to electric door lock)
• Working temperature: -30℃ to 100℃
• Product material: Kevlar wear-resistant cloth + PET metal heating piece
• Installation method: fixed with adhesive tape, L bracket mirror seat fixed
• Wiring method: red to the positive pole, black to the negative pole, ACC line connected to the electric door lock (connected to the reverse light does not light, only heat)
• Product power data: first gear (red): 100%, second gear (orange) 90%, third gear (yellow): 80%, fourth gear (green): 70%, fifth gear (blue): 60%, sixth gear (white): this gear is empty, no current output (for reference only)

Operating Instructions:

• Work status: indicator light is always on (first gear: red 100%; second gear: orange 90%; third gear: yellow 80%; fourth gear: green 70%; fifth gear: blue 60%; sixth gear: white 0%; )
• Click the on/off key: switch gear and power on
• Memory function: choose a suitable temperature gear, long press for 3 seconds, will automatically shut down, memory function on The next time you turn on the temperature will be directly into the last save the use of the temperature gear
• Neutral: Adjust the switch button to the white light, and stay for 5 seconds, the white light will flash 5 off, at this time the memory function is on, the gear is neutral, the next time you turn it on will be directly into neutral, and then press once for the first gear working condition.
• 6-stage output and key sequence definition: red First 100% - orange Second 90% - yellow Third 0% - green Fourth 70% - blue Fifth 60% - white Sixth neutral, and then press the cycle.

Note:

• Please select the appropriate gear according to the ambient temperature. In low-temperature conditions, when you cannot accurately perceive the temperature of the electric handgrip cover in time due to the stiffness of your hand, please use the low or middle gear first to prevent high-temperature burns
• This product is suitable for 12V battery motorcycles, please read the installation diagram carefully before installation, wrong wiring will lead to parts damaged
• This product can be installed on the motorcycle handlebar energized to use, you can use the battery to measure whether the product is properly energized before installation
• It is strictly prohibited to energize the product when not riding (empty burner) to prevent the electric handlebar set temperature is too high and damaging the original handlebar
• Wiring is recommended to connect the door lock wire, most models are black positive, green negative, specific conditions are recommended to use a multimeter measurement